This article offers details on the differences between Top and Back/Rear vent duct exhaust, how to change the orientation, and which models offer this option.
Models with Top Vent and Back Vent options
- Twister
- Twister-Max
- Q5
- Q2
Can I change the duct orientation or exhaust direction after I have received my order?
Yes! The duct exhaust orientation on the models listed above is interchangeable.
To change from Top Vent to Back Vent ( or vice versa), the following steps are required:
- Unscrew the blower (and exhaust cover plate if applicable)
- Rotate and Flip the blower to the desired exhaust position
- Route the cables through the correct knock-out hole (some models have one on each side of the front metal panel)
- Re-attach the blower with the provided screws, as well as any cover plate to cover all exhaust openings
NOTE: In some cases, if the wiring harness is too short and if there is no knock-out hole on the other side of the front metal panel, extension of the wires might be necessary.
Comments
0 comments
Please sign in to leave a comment.